WHO Poll
Q:



medwayhammer1 12:12 Sat Sep 7
Glaziers...any on here? Advice needed!
Basically had to break a glass panel in the door panel, cos like a cunt I locked myself out. Glass is about 3 ft by 2 ft and been quoted £132 to be replaced. Just wondered roughly what I should be looking to pay, as think its a bit excessive? If not how hard is it to do yourself? Obviously it ain't advisable to try wiping my knob on it! Ta in advance

Replies - Newest Posts First (Show In Chronological Order)

mike hunt 11:05 Mon Sep 9
Re: Glaziers...any on here? Advice needed!
how about you don't be a tight cunt, and pay the 132 quid, the blokes trying to earn a fucking living

jfk 3:03 Mon Sep 9
Re: Glaziers...any on here? Advice needed!
It doesn't sound too expensive to me considering it's a double visit (initially to measure and then to fix) job.You could have a ring around and possibly save yourself a score.
I'd imagine it's double glazed and I personally wouldnt sod around attempting to do the job myself.
The measurements need to be spot on.Toughened glass is easily broken when nailing/glueing beading it can be a pain to find a match to existing.
I'd bite the bullet and let a reputable firm replace it.

J.Riddle 2:28 Mon Sep 9
Re: Glaziers...any on here? Advice needed!
Very few left seem to be melting away these days, it’s a damn shame, I blame global warming.

arsegrapes 8:47 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
CRACKING thread this, a CUT above, very POLISHED around the edges.

eusebiovic 6:52 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
Alan Pardew is a trained glazier...if you call him make sure the wife is at her sisters though...

Worst Case Ontario 6:35 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
Www.crystalpalaceonline.net

arsene york-hunt 5:15 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
Load of bollox. I can see right through this.

Hermit Road 4:09 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
Sounds like you STAINED your pants when you saw the price.

Far Cough 4:07 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
Try Bill Glazier ex Coventry GK

charleyfarley 4:03 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
It's not January yet, you will have to wait for next window

andyd12345 3:19 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
Malcolm should be able to help. He’ll be at Old Trafford next Saturday

gph 3:07 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
I thought formica was temporary, but glass permanent.

Bungo 2:54 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
Tend to be very slippery, but if climate change has it's way, will be much smaller in future.

Westham67 1:35 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
A SMASHING thread

Mr Kenzo 1:33 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
This must be a real PANE in the arse for you

JLAP 1:28 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
What no puns? site dogs etc..

Bet that’s a right PAIN

J.Riddle 12:39 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
https://m.youtube.com/watch?v=ZC3OctV0o6c

Julio is your man if Double Glazing?

Westham67 12:27 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
I take it you tried wiping you knob on before opening this thread ?

COOL HAND LUKE 12:24 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
Have you tried those guys who replace individual panes due to them being 'steamed up' (I'm assuming door is double glazed?).

If it's not, you just remove the beading, remove the old glass, take measurements and a piece of the glass to a glaziers, and they will cut you a new piece to install with putty / beading.

medwayhammer1 12:19 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
I just new some clever cunt would come out with that☺

collyrob 12:17 Sat Sep 7
Re: Glaziers...any on here? Advice needed!
Not very popular at Old Trafford

Page 1 - Next




Copyright 2006 WHO.NET | Powered by: